Suppress re-entrant calls to dhcp_construct_contexts()

Conflicts:
	CHANGELOG

CHANGELOG

@@ -1,3 +1,10 @@
+version 2.72
+            Add ra-advrouter mode, for RFC-3775 mobile IPv6 support.
+
+	    Add support for "ipsets" in *BSD, using pf. Thanks to 
+	    Sven Falempim for the patch.
+
+
 version 2.71
             Subtle change to error handling to help DNSSEC validation 
 	    when servers fail to provide NODATA answers for 

Makefile

@@ -69,7 +69,7 @@ objs = cache.o rfc1035.o util.o option.o forward.o network.o \
        dnsmasq.o dhcp.o lease.o rfc2131.o netlink.o dbus.o bpf.o \
        helper.o tftp.o log.o conntrack.o dhcp6.o rfc3315.o \
        dhcp-common.o outpacket.o radv.o slaac.o auth.o ipset.o \
-       domain.o dnssec.o blockdata.o
+       domain.o dnssec.o blockdata.o tables.c
 
 hdrs = dnsmasq.h config.h dhcp-protocol.h dhcp6-protocol.h \
        dns-protocol.h radv-protocol.h ip6addr.h

bld/Android.mk

@@ -9,7 +9,7 @@ LOCAL_SRC_FILES :=  bpf.c cache.c dbus.c dhcp.c dnsmasq.c \
 		    rfc2131.c tftp.c util.c conntrack.c \
 		    dhcp6.c rfc3315.c dhcp-common.c outpacket.c \
 		    radv.c slaac.c auth.c ipset.c domain.c \
-	            dnssec.c dnssec-openssl.c blockdata.c
+	            dnssec.c dnssec-openssl.c blockdata.c tables.c
 
 LOCAL_MODULE := dnsmasq
 

debian/changelog

@@ -1,3 +1,29 @@
+dnsmasq (2.72-1) unstable; urgency=low
+
+   * New upstream.
+
+ -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 20 May 2014 21:01:11 +0000
+
+dnsmasq (2.71-1) unstable; urgency=low
+
+   * New upstream.
+   * Fix 100% CPU-usage bug when dnsmasq started with cachesize
+     set to zero. (LP: #1314697)
+
+ -- Simon Kelley <simon@thekelleys.org.uk>  Fri, 16 May 2014 20:17:10 +0000
+
+dnsmasq (2.70-3) unstable; urgency=medium
+
+   * Write a pid-file, even when being started using systemd, since
+     other components may wish to signal dnsmasq.
+   * Enable dnsmasq systemd unit on install. Otherwise dnsmasq does not run on
+     fresh installations (without administrator handholding) and even worse it
+     is disabled on systems switching from sysv to systemd. Modify
+     postinst/postrm exactly as dh_systemd would, add dependency on
+     init-system-helpers. Closes: #724602
+
+ -- Simon Kelley <simon@thekelleys.org.uk>  Sun, 11 May 2014 17:45:21 +0000
+
 dnsmasq (2.70-2) unstable; urgency=low
 
    * Ensure daemon not stared if dnsmasq package has been removed,

debian/control

@@ -2,13 +2,15 @@ Source: dnsmasq
 Section: net
 Priority: optional
 Build-depends: gettext, libnetfilter-conntrack-dev [linux-any],
-               libidn11-dev, libdbus-1-dev (>=0.61), libgmp-dev, nettle-dev (>=2.4-3)
+               libidn11-dev, libdbus-1-dev (>=0.61), libgmp-dev, 
+               nettle-dev (>=2.4-3)
 Maintainer: Simon Kelley <simon@thekelleys.org.uk>
 Standards-Version: 3.9.3
 
 Package: dnsmasq
 Architecture: all
-Depends: netbase, dnsmasq-base(>= ${binary:Version})
+Depends: netbase, dnsmasq-base(>= ${binary:Version}),
+         init-system-helpers (>= 1.18~)
 Suggests: resolvconf
 Conflicts: resolvconf (<<1.15)
 Description: Small caching DNS proxy and DHCP/TFTP server

debian/init

@@ -277,9 +277,15 @@ case "$1" in
 	stop_resolvconf
 	;;
   systemd-exec)
-#  --pid-file without argument disables writing a PIDfile, we don't need one with sytemd.
+# /var/run may be volatile, so we need to ensure that
+        # /var/run/dnsmasq exists here as well as in postinst
+        if [ ! -d /var/run/dnsmasq ]; then
+           mkdir /var/run/dnsmasq || return 2
+           chown dnsmasq:nogroup /var/run/dnsmasq || return 2
+        fi
 # Enable DBus by default because we use DBus activation with systemd.
-	exec $DAEMON --keep-in-foreground --pid-file --enable-dbus \
+	exec $DAEMON --keep-in-foreground --enable-dbus \
+	    -x /var/run/dnsmasq/$NAME.pid \
 	    ${MAILHOSTNAME:+ -m $MAILHOSTNAME} \
 	    ${MAILTARGET:+ -t $MAILTARGET} \
 	    ${DNSMASQ_USER:+ -u $DNSMASQ_USER} \

debian/postinst

@@ -1,6 +1,22 @@
 #!/bin/sh
 set -e
 
+# Code copied from dh_systemd_enable ----------------------
+# This will only remove masks created by d-s-h on package removal.
+deb-systemd-helper unmask dnsmasq.service >/dev/null || true
+
+# was-enabled defaults to true, so new installations run enable.
+if deb-systemd-helper --quiet was-enabled dnsmasq.service; then
+	# Enables the unit on first installation, creates new
+	# symlinks on upgrades if the unit file has changed.
+	deb-systemd-helper enable dnsmasq.service >/dev/null || true
+else
+	# Update the statefile to add new symlinks (if any), which need to be
+	# cleaned up on purge. Also remove old symlinks.
+	deb-systemd-helper update-state dnsmasq.service >/dev/null || true
+fi
+# End code copied from dh_systemd_enable ------------------
+
 if [ -x /etc/init.d/dnsmasq ]; then
    update-rc.d dnsmasq defaults 15 85 >/dev/null
 

debian/postrm

@@ -4,3 +4,19 @@ set -e
 if [ purge = "$1" ]; then
    update-rc.d dnsmasq remove >/dev/null
 fi
+
+# Code copied from dh_systemd_enable ----------------------
+if [ "$1" = "remove" ]; then
+	if [ -x "/usr/bin/deb-systemd-helper" ]; then
+		deb-systemd-helper mask dnsmasq.service >/dev/null
+	fi
+fi
+
+if [ "$1" = "purge" ]; then
+	if [ -x "/usr/bin/deb-systemd-helper" ]; then
+		deb-systemd-helper purge dnsmasq.service >/dev/null
+		deb-systemd-helper unmask dnsmasq.service >/dev/null
+	fi
+fi
+# End code copied from dh_systemd_enable ------------------
+

debian/rules

@@ -11,18 +11,16 @@
 
 package=dnsmasq-base
 
-CFLAGS = $(shell export DEB_BUILD_OPTIONS=$(DEB_BUILD_OPTIONS); dpkg-buildflags --get CFLAGS)
-CFLAGS += $(shell dpkg-buildflags --get CPPFLAGS)
+dpkg_buildflags := DEB_BUILD_MAINT_OPTIONS="hardening=+all" dpkg-buildflags
+
+CFLAGS = $(shell $(dpkg_buildflags) --get CFLAGS)
+CFLAGS += $(shell $(dpkg_buildflags) --get CPPFLAGS)
 CFLAGS += -Wall -W
 
-LDFLAGS = $(shell dpkg-buildflags --get LDFLAGS)
+LDFLAGS = $(shell $(dpkg_buildflags) --get LDFLAGS)
 
 DEB_COPTS = $(COPTS)
 
-# The nettle library in Debian is too old to include
-# ECC support.
-DEB_COPTS += -DNO_NETTLE_ECC
-
 TARGET = install-i18n
 
 DEB_BUILD_ARCH_OS := $(shell dpkg-architecture -qDEB_BUILD_ARCH_OS)

debian/systemd.service

@@ -13,9 +13,8 @@ ExecStartPre=/usr/sbin/dnsmasq --test
 # itself, when called with the "systemd-exec" function.
 #
 # It also adds the command-line flags
-#    --keep-in-foreground --pid-file --enable-dbus 
-# to disable writing a pid-file (not needed with systemd) and 
-# enable DBus by default because we use DBus activation.
+#    --keep-in-foreground --enable-dbus 
+# to enable DBus by default because we use DBus activation.
 #
 ExecStart=/etc/init.d/dnsmasq systemd-exec
 

man/dnsmasq.8

@@ -794,7 +794,7 @@ and
 for details.)
 
 For IPv6, the mode may be some combination of
-.B ra-only, slaac, ra-names, ra-stateless.
+.B ra-only, slaac, ra-names, ra-stateless, ra-advrouter.
 
 .B ra-only
 tells dnsmasq to offer Router Advertisement only on this subnet,
@@ -829,6 +829,11 @@ can be combined  with
 and
 .B slaac.
 
+.B ra-advrouter
+enables a mode where router address(es) rather than prefix(es) are included in the advertisements.
+This is described in RFC-3775 section 7.2 and is used in mobile IPv6. In this mode the interval option
+is also included, as described in RFC-3775 section 7.3.
+
 .TP
 .B \-G, --dhcp-host=[<hwaddr>][,id:<client_id>|*][,set:<tag>][,<ipaddr>][,<hostname>][,<lease_time>][,ignore]
 Specify per host parameters for the DHCP server. This allows a machine

src/config.h

@@ -330,7 +330,7 @@ HAVE_SOCKADDR_SA_LEN
 #undef HAVE_AUTH
 #endif
 
-#if defined(NO_IPSET) || !defined(HAVE_LINUX_NETWORK)
+#if defined(NO_IPSET)
 #undef HAVE_IPSET
 #endif
 

src/dhcp.c

@@ -404,7 +404,8 @@ void dhcp_packet(time_t now, int pxe_fd)
       memcpy(arp_req.arp_ha.sa_data, mess->chaddr, mess->hlen);
       /* interface name already copied in */
       arp_req.arp_flags = ATF_COM;
-      ioctl(daemon->dhcpfd, SIOCSARP, &arp_req);
+      if (ioctl(daemon->dhcpfd, SIOCSARP, &arp_req) == -1)
+	my_syslog(MS_DHCP | LOG_ERR, _("ARP-cache injection failed: %s"), strerror(errno));
     }
 #elif defined(HAVE_SOLARIS_NETWORK)
   else if ((ntohs(mess->flags) & 0x8000) || mess->hlen != ETHER_ADDR_LEN || mess->htype != ARPHRD_ETHER)

src/dhcp6.c

@@ -708,12 +708,20 @@ static int construct_worker(struct in6_addr *local, int prefix,
 
 void dhcp_construct_contexts(time_t now)
 { 
+  static int active = 0;
   struct dhcp_context *context, *tmp, **up;
   struct cparam param;
   param.newone = 0;
   param.newname = 0;
   param.now = now;
 
+  /* Various calls that we make may end up calling iface_enumerate(), which can then 
+     call us again, We're NOT re-entrant, so ignore a second invokation. */
+  if (active)
+    return;
+
+  active = 1;
+
   for (context = daemon->dhcp6; context; context = context->next)
     if (context->flags & CONTEXT_CONSTRUCTED)
       context->flags |= CONTEXT_GC;
@@ -727,8 +735,7 @@ void dhcp_construct_contexts(time_t now)
      
       if (context->flags & CONTEXT_GC && !(context->flags & CONTEXT_OLD))
 	{
-	  if ((context->flags & (CONTEXT_RA_ONLY | CONTEXT_RA_NAME | CONTEXT_RA_STATELESS)) ||
-	      option_bool(OPT_RA))
+	  if ((context->flags & CONTEXT_RA) || option_bool(OPT_RA))
 	    {
 	      /* previously constructed context has gone. advertise it's demise */
 	      context->flags |= CONTEXT_OLD;
@@ -772,6 +779,8 @@ void dhcp_construct_contexts(time_t now)
 	/* Not doing DHCP, so no lease system, manage alarms for ra only */
 	send_alarm(periodic_ra(now), now);
     }
+
+  active = 0;
 }
 
 #endif

src/dnsmasq.h

@@ -823,7 +823,7 @@ struct dhcp_context {
 #define CONTEXT_NETMASK        (1u<<1)
 #define CONTEXT_BRDCAST        (1u<<2)
 #define CONTEXT_PROXY          (1u<<3)
-#define CONTEXT_RA_ONLY        (1u<<4)
+#define CONTEXT_RA_ROUTER      (1u<<4)
 #define CONTEXT_RA_DONE        (1u<<5)
 #define CONTEXT_RA_NAME        (1u<<6)
 #define CONTEXT_RA_STATELESS   (1u<<7)
@@ -838,7 +838,6 @@ struct dhcp_context {
 #define CONTEXT_OLD            (1u<<16)
 #define CONTEXT_V6             (1u<<17)
 
-
 struct ping_result {
   struct in_addr addr;
   time_t time;

src/ipset.c

@@ -16,7 +16,7 @@
 
 #include "dnsmasq.h"
 
-#ifdef HAVE_IPSET
+#if defined(HAVE_IPSET) && defined(HAVE_LINUX_NETWORK)
 
 #include <string.h>
 #include <errno.h>

src/option.c

@@ -2583,9 +2583,11 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma
 		if (strcmp(a[leasepos], "static") == 0)
 		  new->flags |= CONTEXT_STATIC | CONTEXT_DHCP;
 		else if (strcmp(a[leasepos], "ra-only") == 0 || strcmp(a[leasepos], "slaac") == 0 )
-		  new->flags |= CONTEXT_RA_ONLY | CONTEXT_RA;
+		  new->flags |= CONTEXT_RA;
 		else if (strcmp(a[leasepos], "ra-names") == 0)
 		  new->flags |= CONTEXT_RA_NAME | CONTEXT_RA;
+		else if (strcmp(a[leasepos], "ra-advrouter") == 0)
+		  new->flags |= CONTEXT_RA_ROUTER | CONTEXT_RA;
 		else if (strcmp(a[leasepos], "ra-stateless") == 0)
 		  new->flags |= CONTEXT_RA_STATELESS | CONTEXT_DHCP | CONTEXT_RA;
 		else if (leasepos == 1 && inet_pton(AF_INET6, a[leasepos], &new->end6))
@@ -2615,7 +2617,7 @@ static int one_opt(int option, char *arg, char *errstr, char *gen_err, int comma
 	    
 	    if (new->prefix != 64)
 	      {
-		if ((new->flags & (CONTEXT_RA_ONLY | CONTEXT_RA_NAME | CONTEXT_RA_STATELESS)))
+		if (new->flags & CONTEXT_RA)
 		  ret_err(_("prefix length must be exactly 64 for RA subnets"));
 		else if (new->flags & CONTEXT_TEMPLATE)
 		  ret_err(_("prefix length must be exactly 64 for subnet constructors"));

src/radv-protocol.h

@@ -49,6 +49,7 @@ struct prefix_opt {
 #define ICMP6_OPT_SOURCE_MAC   1
 #define ICMP6_OPT_PREFIX       3
 #define ICMP6_OPT_MTU          5
+#define ICMP6_OPT_ADV_INTERVAL 7
 #define ICMP6_OPT_RDNSS       25
 #define ICMP6_OPT_DNSSL       31
 

src/radv.c

@@ -28,7 +28,7 @@
 
 struct ra_param {
   time_t now;
-  int ind, managed, other, found_context, first;
+  int ind, managed, other, found_context, first, adv_router;
   char *if_name;
   struct dhcp_netid *tags;
   struct in6_addr link_local, link_global, ula;
@@ -226,6 +226,7 @@ static void send_ra(time_t now, int iface, char *iface_name, struct in6_addr *de
   parm.managed = 0;
   parm.other = 0;
   parm.found_context = 0;
+  parm.adv_router = 0;
   parm.if_name = iface_name;
   parm.first = 1;
   parm.now = now;
@@ -286,8 +287,7 @@ static void send_ra(time_t now, int iface, char *iface_name, struct in6_addr *de
 	      setaddr6part(&local, addr6part(&local) & ~((context->prefix == 64) ? (u64)-1LL : (1LLU << (128 - context->prefix)) - 1LLU));
 	     
 	      
-	      if ((context->flags & 
-		   (CONTEXT_RA_ONLY | CONTEXT_RA_NAME | CONTEXT_RA_STATELESS)))
+	      if (context->flags & CONTEXT_RA)
 		{
 		  do_slaac = 1;
 		  if (context->flags & CONTEXT_DHCP)
@@ -339,6 +339,17 @@ static void send_ra(time_t now, int iface, char *iface_name, struct in6_addr *de
   if (!old_prefix && !parm.found_context)
     return; 
   
+  /* If we're sending router address instead of prefix in at least on prefix,
+     include the advertisement interval option. */
+  if (parm.adv_router)
+    {
+      put_opt6_char(ICMP6_OPT_ADV_INTERVAL);
+      put_opt6_char(1);
+      put_opt6_short(0);
+      /* interval value is in milliseconds */
+      put_opt6_long(1000 * calc_interval(find_iface_param(iface_name)));
+    }
+
 #ifdef HAVE_LINUX_NETWORK
   /* Note that IPv6 MTU is not necessarilly the same as the IPv4 MTU
      available from SIOCGIFMTU */
@@ -500,6 +511,7 @@ static int add_prefixes(struct in6_addr *local,  int prefix,
 	  int do_slaac = 0;
 	  int deprecate  = 0;
 	  int constructed = 0;
+	  int adv_router = 0;
 	  unsigned int time = 0xffffffff;
 	  struct dhcp_context *context;
 	  
@@ -511,8 +523,7 @@ static int add_prefixes(struct in6_addr *local,  int prefix,
 	      {
 		context->saved_valid = valid;
 
-		if ((context->flags & 
-		     (CONTEXT_RA_ONLY | CONTEXT_RA_NAME | CONTEXT_RA_STATELESS)))
+		if (context->flags & CONTEXT_RA) 
 		  {
 		    do_slaac = 1;
 		    if (context->flags & CONTEXT_DHCP)
@@ -530,7 +541,17 @@ static int add_prefixes(struct in6_addr *local,  int prefix,
 		    param->managed = 1;
 		    param->other = 1;
 		  }
-		
+
+		/* Configured to advertise router address, not prefix. See RFC 3775 7.2 
+		 In this case we do all addresses associated with a context, 
+		 hence the real_prefix setting here. */
+		if (context->flags & CONTEXT_RA_ROUTER)
+		  {
+		    adv_router = 1;
+		    param->adv_router = 1;
+		    real_prefix = context->prefix;
+		  }
+
 		/* find floor time, don't reduce below 3 * RA interval. */
 		if (time > context->lease_time)
 		  {
@@ -556,7 +577,7 @@ static int add_prefixes(struct in6_addr *local,  int prefix,
 		/* subsequent prefixes on the same interface 
 		   and subsequent instances of this prefix don't need timers.
 		   Be careful not to find the same prefix twice with different
-		   addresses. */
+		   addresses unless we're advertising the actual addresses. */
 		if (!(context->flags & CONTEXT_RA_DONE))
 		  {
 		    if (!param->first)
@@ -607,13 +628,18 @@ static int add_prefixes(struct in6_addr *local,  int prefix,
 	      if ((opt = expand(sizeof(struct prefix_opt))))
 		{
 		  /* zero net part of address */
-		  setaddr6part(local, addr6part(local) & ~((real_prefix == 64) ? (u64)-1LL : (1LLU << (128 - real_prefix)) - 1LLU));
+		  if (!adv_router)
+		    setaddr6part(local, addr6part(local) & ~((real_prefix == 64) ? (u64)-1LL : (1LLU << (128 - real_prefix)) - 1LLU));
 		  
 		  opt->type = ICMP6_OPT_PREFIX;
 		  opt->len = 4;
 		  opt->prefix_len = real_prefix;
 		  /* autonomous only if we're not doing dhcp, always set "on-link" */
-		  opt->flags = do_slaac ? 0xC0 : 0x80;
+		  opt->flags = 0x80;
+		  if (do_slaac)
+		    opt->flags |= 0x40;
+		  if (adv_router)
+		    opt->flags |= 0x20;
 		  opt->valid_lifetime = htonl(valid);
 		  opt->preferred_lifetime = htonl(preferred);
 		  opt->reserved = 0; 

src/tables.c

@@ -0,0 +1,167 @@
+/* tables.c is Copyright (c) 2014 Dohnuts All Rights Reserved.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; version 2 dated June, 1991, or
+   (at your option) version 3 dated 29 June, 2007.
+ 
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+     
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "dnsmasq.h"
+
+#if defined(HAVE_IPSET) && defined(HAVE_BSD_NETWORK)
+
+#include <sys/types.h>
+#include <sys/ioctl.h>
+
+#include <net/if.h>
+#include <netinet/in.h>
+#include <net/pfvar.h>
+
+#include <err.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#define UNUSED(x) (void)(x)
+
+static char *pf_device = "/dev/pf";
+static int dev = -1;
+
+static char *pfr_strerror(int errnum)
+{
+  switch (errnum) 
+    {
+    case ESRCH:
+      return "Table does not exist";
+    case ENOENT:
+      return "Anchor or Ruleset does not exist";
+    default:
+      return strerror(errnum);
+    }
+}
+
+static int pfr_add_tables(struct pfr_table *tbl, int size, int *nadd, int flags)
+{
+  struct pfioc_table io;
+  
+  if (size < 0 || (size && tbl == NULL)) 
+    {
+      errno = EINVAL;
+      return (-1);
+    }
+  bzero(&io, sizeof io);
+  io.pfrio_flags = flags;
+  io.pfrio_buffer = tbl;
+  io.pfrio_esize = sizeof(*tbl);
+  io.pfrio_size = size;
+  if (ioctl(dev, DIOCRADDTABLES, &io))
+    return (-1);
+  if (nadd != NULL)
+    *nadd = io.pfrio_nadd;
+  return (0);
+}
+
+static int fill_addr(const struct all_addr *ipaddr, int flags, struct pfr_addr* addr) {
+  if ( !addr || !ipaddr)
+    {
+      my_syslog(LOG_ERR, _("error: fill_addr missused"));
+      return -1;
+    }
+  bzero(addr, sizeof(*addr));
+#ifdef HAVE_IPV6
+  if (flags & F_IPV6) 
+    {
+      addr->pfra_af = AF_INET6;
+      addr->pfra_net = 0x80;
+      memcpy(&(addr->pfra_ip6addr), &(ipaddr->addr), sizeof(struct in6_addr));
+    } 
+  else 
+#endif
+    {
+      addr->pfra_af = AF_INET;
+      addr->pfra_net = 0x20;
+      addr->pfra_ip4addr.s_addr = ipaddr->addr.addr4.s_addr;
+    }
+  return 1;
+}
+
+/*****************************************************************************/
+
+void ipset_init(void) 
+{
+  dev = open( pf_device, O_RDWR);
+  if (dev == -1)
+    {
+      err(1, "%s", pf_device);
+      die (_("failed to access pf devices: %s"), NULL, EC_MISC);
+    }
+}
+
+int add_to_ipset(const char *setname, const struct all_addr *ipaddr,
+		      int flags, int remove)
+{
+  struct pfr_addr addr;
+  struct pfioc_table io;
+  struct pfr_table table;
+  int n = 0, rc = 0;
+
+  if ( dev == -1 ) 
+    {
+      my_syslog(LOG_ERR, _("warning: no opened pf devices %s"), pf_device);
+      return -1;
+    }
+
+  bzero(&table, sizeof(struct pfr_table));
+  table.pfrt_flags |= PFR_TFLAG_PERSIST;
+  if ( strlen(setname) >= PF_TABLE_NAME_SIZE )
+    {
+      my_syslog(LOG_ERR, _("error: cannot use table name %s"), setname);
+      errno = ENAMETOOLONG;
+      return -1;
+    }
+  
+  if ( strlcpy(table.pfrt_name, setname,
+               sizeof(table.pfrt_name)) >= sizeof(table.pfrt_name)) 
+    {
+      my_syslog(LOG_ERR, _("error: cannot strlcpy table name %s"), setname);
+      return -1;
+    }
+  
+  if (rc = pfr_add_tables(&table, 1, &n, 0)) 
+    {
+      my_syslog(LOG_WARNING, _("warning: pfr_add_tables: %s(%d)"),
+		pfr_strerror(errno),rc);
+      return -1;
+    }
+  table.pfrt_flags &= ~PFR_TFLAG_PERSIST;
+  if (n)
+    my_syslog(LOG_INFO, _("info: table created"));
+  
+  fill_addr(ipaddr,flags,&addr);
+  bzero(&io, sizeof(io));
+  io.pfrio_flags = 0;
+  io.pfrio_table = table;
+  io.pfrio_buffer = &addr;
+  io.pfrio_esize = sizeof(addr);
+  io.pfrio_size = 1;
+  if (ioctl(dev, ( remove ? DIOCRDELADDRS : DIOCRADDADDRS ), &io)) 
+    {
+      my_syslog(LOG_WARNING, _("warning: DIOCR%sADDRS: %s"), ( remove ? "DEL" : "ADD" ), pfr_strerror(errno));
+      return -1;
+    }
+  
+  my_syslog(LOG_INFO, _("%d addresses %s"),
+            io.pfrio_nadd, ( remove ? "removed" : "added" ));
+  
+  return io.pfrio_nadd;
+}
+
+
+#endif