Just some stuff

.devcontainer/README.md

@@ -0,0 +1,117 @@
+# Paperless NGX Development Environment
+
+## Overview
+
+Welcome to the Paperless NGX development environment! This setup uses VSCode DevContainers to provide a consistent and seamless development experience.
+
+### What are DevContainers?
+
+DevContainers are a feature in VSCode that allows you to develop within a Docker container. This ensures that your development environment is consistent across different machines and setups. By defining a containerized environment, you can eliminate the "works on my machine" problem.
+
+### Advantages of DevContainers
+
+- **Consistency**: Same environment for all developers.
+- **Isolation**: Separate development environment from your local machine.
+- **Reproducibility**: Easily recreate the environment on any machine.
+- **Pre-configured Tools**: Include all necessary tools and dependencies in the container.
+
+## DevContainer Setup
+
+The DevContainer configuration provides up all the necessary services for Paperless NGX, including:
+
+- Redis
+- Gotenberg
+- Tika
+
+Data is stored using Docker volumes to ensure persistence across container restarts.
+
+## Configuration Files
+
+The setup includes debugging configurations (`launch.json`) and tasks (`tasks.json`) to help you manage and debug various parts of the project:
+
+- **Backend Debugging:**
+  - `manage.py runserver`
+  - `manage.py document-consumer`
+  - `celery`
+- **Maintenance Tasks:**
+  - Create superuser
+  - Run migrations
+  - Recreate virtual environment (`.venv` with pipenv)
+  - Compile frontend assets
+
+## Getting Started
+
+### Step 1: Running the DevContainer
+
+To start the DevContainer:
+
+1. Open VSCode.
+2. Open the project folder.
+3. Open the command palette:
+   - **Windows/Linux**: `Ctrl+Shift+P`
+   - **Mac**: `Cmd+Shift+P`
+4. Type and select `Dev Containers: Rebuild and Reopen in Container`.
+
+VSCode will build and start the DevContainer environment.
+
+### Step 2: Initial Setup
+
+Once the DevContainer is up and running, perform the following steps:
+
+1. **Compile Frontend Assets**:
+
+   - Open the command palette:
+     - **Windows/Linux**: `Ctrl+Shift+P`
+     - **Mac**: `Cmd+Shift+P`
+   - Select `Tasks: Run Task`.
+   - Choose `Frontend Compile`.
+
+2. **Run Database Migrations**:
+
+   - Open the command palette:
+     - **Windows/Linux**: `Ctrl+Shift+P`
+     - **Mac**: `Cmd+Shift+P`
+   - Select `Tasks: Run Task`.
+   - Choose `Migrate Database`.
+
+3. **Create Superuser**:
+   - Open the command palette:
+     - **Windows/Linux**: `Ctrl+Shift+P`
+     - **Mac**: `Cmd+Shift+P`
+   - Select `Tasks: Run Task`.
+   - Choose `Create Superuser`.
+
+### Debugging and Running Services
+
+You can start and debug backend services either as debugging sessions via `launch.json` or as tasks.
+
+#### Using `launch.json`:
+
+1. Press `F5` or go to the **Run and Debug** view in VSCode.
+2. Select the desired configuration:
+   - `Runserver`
+   - `Document Consumer`
+   - `Celery`
+
+#### Using Tasks:
+
+1. Open the command palette:
+   - **Windows/Linux**: `Ctrl+Shift+P`
+   - **Mac**: `Cmd+Shift+P`
+2. Select `Tasks: Run Task`.
+3. Choose the desired task:
+   - `Runserver`
+   - `Document Consumer`
+   - `Celery`
+
+### Additional Maintenance Tasks
+
+Additional tasks are available for common maintenance operations:
+
+- **Recreate .venv**: For setting up the virtual environment using pipenv.
+- **Migrate Database**: To apply database migrations.
+- **Create Superuser**: To create an admin user for the application.
+
+## Let's Get Started!
+
+Follow the steps above to get your development environment up and running. Happy coding!

.devcontainer/devcontainer.json

@@ -3,26 +3,14 @@
     "dockerComposeFile": "docker-compose.devcontainer.sqlite-tika.yml",
     "service": "paperless-development",
     "workspaceFolder": "/usr/src/paperless/paperless-ngx",
-    "postCreateCommand": "pipenv install --dev && pipenv run pre-commit install",
+    "postCreateCommand": "/bin/bash -c pre-commit install && pipenv install --dev",
     "customizations": {
         "vscode": {
-          "extensions": [
-            "mhutchie.git-graph",
-            "ms-python.python",
-            "ms-vscode.js-debug-nightly",
-            "eamodio.gitlens",
-            "yzhang.markdown-all-in-one"
-          ],
-          "settings": {
-            "python.defaultInterpreterPath": "/usr/src/paperless/paperless-ngx/.venv/bin/python",
-            "python.pythonPath": "/usr/src/paperless/paperless-ngx/.venv/bin/python",
-            "python.terminal.activateEnvInCurrentTerminal": true,
-            "editor.formatOnPaste": false,
-            "editor.formatOnSave": true,
-            "editor.formatOnType": true,
-            "files.trimTrailingWhitespace": true
-          }
+            "extensions": [
+              "mhutchie.git-graph",
+              "ms-python.python"
+            ]
         }
-      },
-      "remoteUser": "paperless"
-    }
+    },
+    "remoteUser": "paperless"
+  }

.devcontainer/docker-compose.devcontainer.sqlite-tika.yml

@@ -27,7 +27,7 @@ services:
     image: docker.io/library/redis:7
     restart: unless-stopped
     volumes:
-      - ./redisdata:/data
+      - redisdata:/data
 
   # No ports need to be exposed; the VSCode DevContainer plugin manages them.
   paperless-development:
@@ -43,16 +43,14 @@ services:
     volumes:
       - ..:/usr/src/paperless/paperless-ngx:delegated
       - ../.devcontainer/vscode:/usr/src/paperless/paperless-ngx/.vscode:delegated # VSCode config files
-      - pipenv:/usr/src/paperless/paperless-ngx/.venv
+      - pipenv:/usr/src/paperless/paperless-ngx/.venv # Pipenv environment persisted in volume
       - /usr/src/paperless/paperless-ngx/src/documents/static/frontend # Static frontend files exist only in container
       - /usr/src/paperless/paperless-ngx/src/.pytest_cache
       - /usr/src/paperless/paperless-ngx/.ruff_cache
       - /usr/src/paperless/paperless-ngx/htmlcov
       - /usr/src/paperless/paperless-ngx/.coverage
-      - ./data:/usr/src/paperless/paperless-ngx/data
-      - ./media:/usr/src/paperless/paperless-ngx/media
-      - ./consume:/usr/src/paperless/paperless-ngx/consume
-      - ~/.gitconfig:/usr/src/paperless/.gitconfig:ro
+      - data:/usr/src/paperless/paperless-ngx/data
+      - media:/usr/src/paperless/paperless-ngx/media
     environment:
       PAPERLESS_REDIS: redis://broker:6379
       PAPERLESS_TIKA_ENABLED: 1
@@ -80,4 +78,7 @@ services:
     restart: unless-stopped
 
 volumes:
+  data:
+  media:
+  redisdata:
   pipenv:

.devcontainer/vscode/launch.json

@@ -2,57 +2,42 @@
     "version": "0.2.0",
     "configurations": [
         {
-            "name": "Chrome: Debug Angular Frontend",
-						"description": "Debug the Angular Dev Frontend in Chrome",
-            "type": "chrome",
-            "request": "launch",
-            "url": "http://localhost:4200",
-            "webRoot": "${workspaceFolder}/src-ui",
-            "preLaunchTask": "Start: Frontend Angular"
-        },
-        {
-            "name": "Debug: Backend Server (manage.py runserver)",
-						"description": "Debug the Django Backend Server",
+            "name": "manage.py runserver",
             "type": "python",
             "request": "launch",
             "program": "${workspaceFolder}/src/manage.py",
-            "args": [
-                "runserver"
-            ],
-            "django": true,
             "console": "integratedTerminal",
-            "env": {
-                "PYTHONPATH": "${workspaceFolder}/src"
-            },
-            "python": "${workspaceFolder}/.venv/bin/python"
+            "justMyCode": true,
+            "args": ["runserver"],
+            "django": true
         },
         {
-            "name": "Debug: Consumer Service (manage.py document_consumer)",
-						"description": "Debug the Consumer Service which processes files from a directory",
+            "name": "manage.py document_consumer",
             "type": "python",
             "request": "launch",
             "program": "${workspaceFolder}/src/manage.py",
-            "args": [
-                "document_consumer"
-            ],
-            "django": true,
+            "console": "integratedTerminal",
+            "justMyCode": true,
+            "args": ["document_consumer"],
+            "django": true
+        },
+        {
+            "name": "celery",
+            "type": "python",
+            "cwd": "${workspaceFolder}/src",
+            "request": "launch",
+            "module": "celery",
             "console": "integratedTerminal",
             "env": {
                 "PYTHONPATH": "${workspaceFolder}/src"
-            },
-            "python": "${workspaceFolder}/.venv/bin/python"
-        }
-    ],
-    "compounds": [
-        {
-            "name": "Debug: FullStack",
-						"description": "Debug run the Angular dev frontend, Django backend, and consumer service",
-            "configurations": [
-                "Chrome: Debug Angular Frontend",
-                "Debug: Backend Server (manage.py runserver)",
-                "Debug: Consumer Service (manage.py document_consumer)"
-            ],
-            "preLaunchTask": "Start: Celery Worker"
+              },
+            "args": [
+                "-A",
+                "paperless",
+                "worker",
+                "-l",
+                "DEBUG"
+            ]
         }
     ]
 }

.devcontainer/vscode/tasks.json

@@ -1,84 +1,27 @@
 {
 	"version": "2.0.0",
 	"tasks": [
-		{
-			"label": "Start: Celery Worker",
-			"description": "Start the Celery Worker which processes background and consume tasks",
-			"type": "shell",
-			"command": "pipenv run celery --app paperless worker -l DEBUG",
-			"isBackground": true,
-			"options": {
-				"cwd": "${workspaceFolder}/src"
-			},
-			"problemMatcher": [
-				{
-					"owner": "custom",
-					"pattern": [
-						{
-							"regexp": ".",
-							"file": 1,
-							"location": 2,
-							"message": 3
-						}
-					],
-					"background": {
-						"activeOnStart": true,
-						"beginsPattern": "celery.*",
-						"endsPattern": "ready"
-					}
-				}
-			]
+	{
+		"label": "manage.py document_consumer",
+		"type": "shell",
+		"command": "pipenv run python manage.py document_consumer",
+		"group": "build",
+		"presentation": {
+			"echo": true,
+			"reveal": "always",
+			"focus": false,
+			"panel": "shared",
+			"showReuseMessage": false,
+			"clear": true,
+			"revealProblems": "onProblem"
+		},
+		"options": {
+			"cwd": "${workspaceFolder}/src"
+		}
+
 		},
 		{
-			"label": "Start: Frontend Angular",
-			"description": "Start the Frontend Angular Dev Server",
-			"type": "shell",
-			"command": "npm start",
-			"isBackground": true,
-			"options": {
-				"cwd": "${workspaceFolder}/src-ui"
-			},
-			"problemMatcher": [
-				{
-					"owner": "custom",
-					"pattern": [
-						{
-							"regexp": ".",
-							"file": 1,
-							"location": 2,
-							"message": 3
-						}
-					],
-					"background": {
-						"activeOnStart": true,
-						"beginsPattern": ".*",
-						"endsPattern": "Compiled successfully"
-					}
-				}
-			]
-		},
-		{
-			"label": "Start: Consumer Service (manage.py document_consumer)",
-			"description": "Start the Consumer Service which processes files from a directory",
-			"type": "shell",
-			"command": "pipenv run python manage.py document_consumer",
-			"group": "build",
-			"presentation": {
-				"echo": true,
-				"reveal": "always",
-				"focus": false,
-				"panel": "shared",
-				"showReuseMessage": false,
-				"clear": true,
-				"revealProblems": "onProblem"
-			},
-			"options": {
-				"cwd": "${workspaceFolder}/src"
-			}
-		},
-		{
-			"label": "Start: Backend Server (manage.py runserver)",
-			"description": "Start the Backend Server which serves the Django API and the compiled Angular frontend",
+			"label": "manage.py runserver",
 			"type": "shell",
 			"command": "pipenv run python manage.py runserver",
 			"group": "build",
@@ -94,130 +37,100 @@
 			"options": {
 				"cwd": "${workspaceFolder}/src"
 			}
-		},
-		{
-			"label": "Maintenance: manage.py migrate",
-			"description": "Apply database migrations",
-			"type": "shell",
-			"command": "pipenv run python manage.py migrate",
-			"group": "none",
-			"presentation": {
-				"echo": true,
-				"reveal": "always",
-				"focus": true,
-				"panel": "shared",
-				"showReuseMessage": false,
-				"clear": true,
-				"revealProblems": "onProblem"
+
 			},
-			"options": {
-				"cwd": "${workspaceFolder}/src"
-			}
+	  {
+		"label": "Maintenance: manage.py migrate",
+		"type": "shell",
+		"command": "pipenv run python manage.py migrate",
+		"group": "none",
+		"presentation": {
+			"echo": true,
+			"reveal": "always",
+			"focus": true,
+			"panel": "shared",
+			"showReuseMessage": false,
+			"clear": true,
+			"revealProblems": "onProblem"
 		},
-		{
-			"label": "Maintenance: Build Documentation",
-			"description": "Build the documentation with MkDocs",
-			"type": "shell",
-			"command": "pipenv run mkdocs build --config-file mkdocs.yml && pipenv run mkdocs serve",
-			"group": "none",
-			"presentation": {
-				"echo": true,
-				"reveal": "always",
-				"focus": true,
-				"panel": "shared",
-				"showReuseMessage": false,
-				"clear": true,
-				"revealProblems": "onProblem"
-			},
-			"options": {
-				"cwd": "${workspaceFolder}"
-			}
-		},
-		{
-			"label": "Maintenance: manage.py createsuperuser",
-			"description": "Create a superuser",
-			"type": "shell",
-			"command": "pipenv run python manage.py createsuperuser",
-			"group": "none",
-			"presentation": {
-				"echo": true,
-				"reveal": "always",
-				"focus": true,
-				"panel": "shared",
-				"showReuseMessage": false,
-				"clear": true,
-				"revealProblems": "onProblem"
-			},
-			"options": {
-				"cwd": "${workspaceFolder}/src"
-			}
-		},
-		{
-			"label": "Maintenance: recreate .venv",
-			"description": "Recreate the python virtual environment and install python dependencies",
-			"type": "shell",
-			"command": "rm -R -v .venv/* || pipenv install --dev",
-			"group": "none",
-			"presentation": {
-				"echo": true,
-				"reveal": "always",
-				"focus": true,
-				"panel": "shared",
-				"showReuseMessage": false,
-				"clear": true,
-				"revealProblems": "onProblem"
-			},
-			"options": {
-				"cwd": "${workspaceFolder}"
-			}
-		},
-		{
-			"label": "Maintenance: Install Frontend Dependencies",
-			"description": "Install frontend (npm) dependencies",
-			"type": "npm",
-			"script": "install",
-			"path": "src-ui",
-			"group": "clean",
-			"problemMatcher": [],
-			"detail": "install dependencies from package"
-		},
-		{
-			"description": "Clean install frontend dependencies and build the frontend for production",
-			"label": "Maintenance: Compile frontend for production",
-			"type": "shell",
-			"command": "npm ci && ./node_modules/.bin/ng build --configuration production",
-			"group": "none",
-			"presentation": {
-				"echo": true,
-				"reveal": "always",
-				"focus": true,
-				"panel": "shared",
-				"showReuseMessage": false,
-				"clear": true,
-				"revealProblems": "onProblem"
-			},
-			"options": {
-				"cwd": "${workspaceFolder}/src-ui"
-			}
-		},
-		{
-			"label": "Project Setup: Run all Init Tasks",
-			"description": "Runs all init tasks to setup the project including migrate the database, create a superuser and compile the frontend for production",
-			"dependsOrder": "sequence",
-			"dependsOn": [
-				"Maintenance: manage.py migrate",
-				"Maintenance: manage.py createsuperuser",
-				"Maintenance: Compile frontend for production"
-			]
-		},
-		{
-			"label": "Project Start: Run all Services",
-			"description": "Runs all services required to start the project including the Celery Worker, the Consumer Service and the Backend Server",
-			"dependsOn": [
-				"Start: Celery Worker",
-				"Start: Consumer Service (manage.py document_consumer)",
-				"Start: Backend Server (manage.py runserver)"
-			]
+		"options": {
+			"cwd": "${workspaceFolder}/src"
 		}
+	  },
+	  {
+		"label": "Maintenance: manage.py createsuperuser",
+		"type": "shell",
+		"command": "pipenv run python manage.py createsuperuser",
+		"group": "none",
+		"presentation": {
+			"echo": true,
+			"reveal": "always",
+			"focus": true,
+			"panel": "shared",
+			"showReuseMessage": false,
+			"clear": true,
+			"revealProblems": "onProblem"
+		},
+		"options": {
+			"cwd": "${workspaceFolder}/src"
+		}
+	  },
+	  {
+		"label": "compile frontend",
+		"type": "shell",
+		"command": "npm ci && ./node_modules/.bin/ng build --configuration production",
+		"group": "none",
+		"presentation": {
+			"echo": true,
+			"reveal": "always",
+			"focus": true,
+			"panel": "shared",
+			"showReuseMessage": false,
+			"clear": true,
+			"revealProblems": "onProblem"
+		},
+		"options": {
+			"cwd": "${workspaceFolder}/src-ui"
+		}
+	  },
+	  {
+		"label": "Maintenance: recreate .venv",
+		"type": "shell",
+		"command": "rm -R -v .venv/* || pipenv install --dev",
+		"group": "none",
+		"presentation": {
+			"echo": true,
+			"reveal": "always",
+			"focus": true,
+			"panel": "shared",
+			"showReuseMessage": false,
+			"clear": true,
+			"revealProblems": "onProblem"
+		},
+		"options": {
+			"cwd": "${workspaceFolder}"
+		}
+	  },
+	  {
+		"label": "Celery Worker",
+		"type": "shell",
+		"command": "pipenv run celery --app paperless worker -l DEBUG",
+		"group": {
+		  "kind": "build",
+		  "isDefault": true
+		},
+		"presentation": {
+			"echo": true,
+			"reveal": "always",
+			"focus": true,
+			"panel": "shared",
+			"showReuseMessage": false,
+			"clear": true,
+			"revealProblems": "onProblem"
+		},
+		"options": {
+			"cwd": "${workspaceFolder}/src"
+		}
+	  }
 	]
-}
+  }

.dockerignore

@@ -26,5 +26,3 @@
 ./dist
 ./scripts
 ./resources
-# Other stuff
-**/*.drawio.png

.github/ISSUE_TEMPLATE/config.yml

@@ -2,10 +2,10 @@ blank_issues_enabled: false
 contact_links:
   - name: 🤔 Questions and Help
     url: https://github.com/paperless-ngx/paperless-ngx/discussions
-    about: General questions or support for using Paperless-ngx.
+    about: This issue tracker is not for support questions. Please refer to our Discussions.
   - name: 💬 Chat
     url: https://matrix.to/#/#paperlessngx:matrix.org
     about: Want to discuss Paperless-ngx with others? Check out our chat.
   - name: 🚀 Feature Request
     url: https://github.com/paperless-ngx/paperless-ngx/discussions/new?category=feature-requests
-    about: Remember to search for existing feature requests and "up-vote" those that you like.
+    about: Remember to search for existing feature requests and "up-vote" any you like

.github/workflows/ci.yml

@@ -16,7 +16,7 @@ on:
 env:
   # This is the version of pipenv all the steps will use
   # If changing this, change Dockerfile
-  DEFAULT_PIP_ENV_VERSION: "2024.4.1"
+  DEFAULT_PIP_ENV_VERSION: "2024.4.0"
   # This is the default version of Python to use in most steps which aren't specific
   DEFAULT_PYTHON_VERSION: "3.11"
 
@@ -131,7 +131,7 @@ jobs:
       -
         name: Configure ImageMagick
         run: |
-          sudo cp docker/rootfs/etc/ImageMagick-6/paperless-policy.xml /etc/ImageMagick-6/policy.xml
+          sudo cp docker/imagemagick-policy.xml /etc/ImageMagick-6/policy.xml
       -
         name: Install Python dependencies
         run: |

.gitignore

@@ -100,9 +100,3 @@ scripts/nuke
 
 # celery schedule file
 celerybeat-schedule*
-
-# ignore .devcontainer sub folders
-/.devcontainer/consume/
-/.devcontainer/data/
-/.devcontainer/media/
-/.devcontainer/redisdata/

.pre-commit-config.yaml

@@ -29,10 +29,10 @@ repos:
       - id: check-case-conflict
       - id: detect-private-key
   - repo: https://github.com/codespell-project/codespell
-    rev: v2.4.0
+    rev: v2.3.0
     hooks:
       - id: codespell
-        exclude: "(^src-ui/src/locale/)|(^src-ui/e2e/)|(^src/paperless_mail/tests/samples/)"
+        exclude: "(^src-ui/src/locale/)|(^src-ui/e2e/)|(^src/paperless_mail/tests/samples/)|(^src/paperless_einvoice/tests/samples/)|(^src/paperless_einvoice/templates/)"
         exclude_types:
           - pofile
           - json
@@ -51,7 +51,7 @@ repos:
           - 'prettier-plugin-organize-imports@4.1.0'
   # Python hooks
   - repo: https://github.com/astral-sh/ruff-pre-commit
-    rev: v0.9.6
+    rev: v0.8.3
     hooks:
       - id: ruff
       - id: ruff-format

.ruff.toml

@@ -32,25 +32,33 @@ extend-select = [
   "RUF",   # https://docs.astral.sh/ruff/rules/#ruff-specific-rules-ruf
   "FLY",   # https://docs.astral.sh/ruff/rules/#flynt-fly
   "PTH",   # https://docs.astral.sh/ruff/rules/#flake8-use-pathlib-pth
-  "FBT",   # https://docs.astral.sh/ruff/rules/#flake8-boolean-trap-fbt
 ]
 ignore = ["DJ001", "SIM105", "RUF012"]
 
 [lint.per-file-ignores]
 ".github/scripts/*.py" = ["E501", "INP001", "SIM117"]
 "docker/wait-for-redis.py" = ["INP001", "T201"]
+"src/documents/barcodes.py" = ["PTH"]  # TODO Enable & remove
+"src/documents/classifier.py" = ["PTH"]  # TODO Enable & remove
+"src/documents/consumer.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/file_handling.py" = ["PTH"]  # TODO Enable & remove
+"src/documents/index.py" = ["PTH"]  # TODO Enable & remove
+"src/documents/management/commands/decrypt_documents.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/management/commands/document_consumer.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/management/commands/document_exporter.py" = ["PTH"]  # TODO Enable & remove
+"src/documents/management/commands/document_importer.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/migrations/0012_auto_20160305_0040.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/migrations/0014_document_checksum.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/migrations/1003_mime_types.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/migrations/1012_fix_archive_files.py" = ["PTH"]  # TODO Enable & remove
+"src/documents/migrations/1037_webp_encrypted_thumbnail_conversion.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/models.py" = ["SIM115", "PTH"]  # TODO PTH Enable & remove
 "src/documents/parsers.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/signals/handlers.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/tasks.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/tests/test_api_app_config.py" = ["PTH"]  # TODO Enable & remove
+"src/documents/tests/test_api_bulk_download.py" = ["PTH"]  # TODO Enable & remove
+"src/documents/tests/test_api_documents.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/tests/test_classifier.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/tests/test_consumer.py" = ["PTH"]  # TODO Enable & remove
 "src/documents/tests/test_file_handling.py" = ["PTH"]  # TODO Enable & remove
@@ -76,12 +84,8 @@ ignore = ["DJ001", "SIM105", "RUF012"]
 "src/paperless_tesseract/tests/test_parser.py" = ["RUF001", "PTH"]  # TODO PTH Enable & remove
 "src/paperless_tika/tests/test_live_tika.py" = ["PTH"]  # TODO Enable & remove
 "src/paperless_tika/tests/test_tika_parser.py" = ["PTH"]  # TODO Enable & remove
-# Testing
 "*/tests/*.py" = ["E501", "SIM117"]
-# Migrations
 "*/migrations/*.py" = ["E501", "SIM", "T201"]
-# Docker specific
-"docker/rootfs/usr/local/bin/wait-for-redis.py" = ["INP001", "T201"]
 
 [lint.isort]
 force-single-line = true

Dockerfile

@@ -39,70 +39,15 @@ COPY Pipfile* ./
 
 RUN set -eux \
   && echo "Installing pipenv" \
-    && python3 -m pip install --no-cache-dir --upgrade pipenv==2024.4.1 \
+    && python3 -m pip install --no-cache-dir --upgrade pipenv==2024.4.0 \
   && echo "Generating requirement.txt" \
     && pipenv requirements > requirements.txt
 
-# Stage: s6-overlay-base
-# Purpose: Installs s6-overlay and rootfs
-# Comments:
-#  - Don't leave anything extra in here either
-FROM docker.io/python:3.12-slim-bookworm AS s6-overlay-base
-
-WORKDIR /usr/src/s6
-
-# https://github.com/just-containers/s6-overlay#customizing-s6-overlay-behaviour
-ENV \
-    S6_BEHAVIOUR_IF_STAGE2_FAILS=2 \
-    S6_CMD_WAIT_FOR_SERVICES_MAXTIME=0 \
-    S6_VERBOSITY=1 \
-    PATH=/command:$PATH
-
-# Buildx provided, must be defined to use though
-ARG TARGETARCH
-ARG TARGETVARIANT
-# Lock this version
-ARG S6_OVERLAY_VERSION=3.2.0.2
-
-ARG S6_BUILD_TIME_PKGS="curl \
-                        xz-utils"
-
-RUN set -eux \
-    && echo "Installing build time packages" \
-      && apt-get update \
-      && apt-get install --yes --quiet --no-install-recommends ${S6_BUILD_TIME_PKGS} \
-    && echo "Determining arch" \
-      && S6_ARCH="" \
-      && if [ "${TARGETARCH}${TARGETVARIANT}" = "amd64" ]; then S6_ARCH="x86_64"; \
-      elif [ "${TARGETARCH}${TARGETVARIANT}" = "arm64" ]; then S6_ARCH="aarch64"; fi\
-      && if [ -z "${S6_ARCH}" ]; then { echo "Error: Not able to determine arch"; exit 1; }; fi \
-    && echo "Installing s6-overlay for ${S6_ARCH}" \
-      && curl --fail --silent --no-progress-meter --show-error --location --remote-name-all --parallel --parallel-max 4 \
-        "https://github.com/just-containers/s6-overlay/releases/download/v${S6_OVERLAY_VERSION}/s6-overlay-noarch.tar.xz" \
-        "https://github.com/just-containers/s6-overlay/releases/download/v${S6_OVERLAY_VERSION}/s6-overlay-noarch.tar.xz.sha256" \
-        "https://github.com/just-containers/s6-overlay/releases/download/v${S6_OVERLAY_VERSION}/s6-overlay-${S6_ARCH}.tar.xz" \
-        "https://github.com/just-containers/s6-overlay/releases/download/v${S6_OVERLAY_VERSION}/s6-overlay-${S6_ARCH}.tar.xz.sha256" \
-      && echo "Validating s6-archive checksums" \
-        && sha256sum --check ./*.sha256 \
-      && echo "Unpacking archives" \
-        && tar --directory / -Jxpf s6-overlay-noarch.tar.xz \
-        && tar --directory / -Jxpf s6-overlay-${S6_ARCH}.tar.xz \
-      && echo "Removing downloaded archives" \
-        && rm ./*.tar.xz \
-        && rm ./*.sha256 \
-    && echo "Cleaning up image" \
-      && apt-get --yes purge ${S6_BUILD_TIME_PKGS} \
-      && apt-get --yes autoremove --purge \
-      && rm -rf /var/lib/apt/lists/*
-
-# Copy our service defs and filesystem
-COPY ./docker/rootfs /
-
 # Stage: main-app
 # Purpose: The final image
 # Comments:
 #  - Don't leave anything extra in here
-FROM s6-overlay-base AS main-app
+FROM docker.io/python:3.12-slim-bookworm AS main-app
 
 LABEL org.opencontainers.image.authors="paperless-ngx team <hello@paperless-ngx.com>"
 LABEL org.opencontainers.image.documentation="https://docs.paperless-ngx.com/"
@@ -116,7 +61,7 @@ ARG DEBIAN_FRONTEND=noninteractive
 ARG TARGETARCH
 
 # Can be workflow provided, defaults set for manual building
-ARG JBIG2ENC_VERSION=0.30
+ARG JBIG2ENC_VERSION=0.29
 ARG QPDF_VERSION=11.9.0
 ARG GS_VERSION=10.03.1
 
@@ -182,39 +127,91 @@ RUN set -eux \
     && apt-get update \
     && apt-get install --yes --quiet --no-install-recommends ${RUNTIME_PACKAGES} \
     && echo "Installing pre-built updates" \
-      && curl --fail --silent --no-progress-meter --show-error --location --remote-name-all --parallel --parallel-max 4 \
-        https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-        https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
-        https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-        https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
-        https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
-        https://github.com/paperless-ngx/builder/releases/download/jbig2enc-${JBIG2ENC_VERSION}/jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
       && echo "Installing qpdf ${QPDF_VERSION}" \
+        && curl --fail --silent --show-error --location \
+          --output libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
+          https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
+        && curl --fail --silent --show-error --location \
+          --output qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
+          https://github.com/paperless-ngx/builder/releases/download/qpdf-${QPDF_VERSION}/qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
         && dpkg --install ./libqpdf29_${QPDF_VERSION}-1_${TARGETARCH}.deb \
         && dpkg --install ./qpdf_${QPDF_VERSION}-1_${TARGETARCH}.deb \
       && echo "Installing Ghostscript ${GS_VERSION}" \
+        && curl --fail --silent --show-error --location \
+          --output libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+        && curl --fail --silent --show-error --location \
+          --output ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
+        && curl --fail --silent --show-error --location \
+          --output libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
+          https://github.com/paperless-ngx/builder/releases/download/ghostscript-${GS_VERSION}/libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
         && dpkg --install ./libgs10-common_${GS_VERSION}.dfsg-1_all.deb \
         && dpkg --install ./libgs10_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
         && dpkg --install ./ghostscript_${GS_VERSION}.dfsg-1_${TARGETARCH}.deb \
       && echo "Installing jbig2enc" \
+        && curl --fail --silent --show-error --location \
+          --output jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
+          https://github.com/paperless-ngx/builder/releases/download/jbig2enc-${JBIG2ENC_VERSION}/jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
         && dpkg --install ./jbig2enc_${JBIG2ENC_VERSION}-1_${TARGETARCH}.deb \
-      && echo "Configuring imagemagick" \
-        && cp /etc/ImageMagick-6/paperless-policy.xml /etc/ImageMagick-6/policy.xml \
       && echo "Cleaning up image layer" \
         && rm --force --verbose *.deb \
-    && rm --recursive --force --verbose /var/lib/apt/lists/*
+    && rm --recursive --force --verbose /var/lib/apt/lists/* \
+  && echo "Installing supervisor" \
+    && python3 -m pip install --default-timeout=1000 --upgrade --no-cache-dir supervisor==4.2.5
 
 # Copy gunicorn config
 # Changes very infrequently
 WORKDIR /usr/src/paperless/
 
-COPY --chown=1000:1000 gunicorn.conf.py /usr/src/paperless/gunicorn.conf.py
+COPY gunicorn.conf.py .
+
+# setup docker-specific things
+# These change sometimes, but rarely
+WORKDIR /usr/src/paperless/src/docker/
+
+COPY [ \
+  "docker/imagemagick-policy.xml", \
+  "docker/supervisord.conf", \
+  "docker/docker-entrypoint.sh", \
+  "docker/docker-prepare.sh", \
+  "docker/paperless_cmd.sh", \
+  "docker/wait-for-redis.py", \
+  "docker/env-from-file.sh", \
+  "docker/management_script.sh", \
+  "docker/flower-conditional.sh", \
+  "docker/install_management_commands.sh", \
+  "/usr/src/paperless/src/docker/" \
+]
+
+RUN set -eux \
+  && echo "Configuring ImageMagick" \
+    && mv imagemagick-policy.xml /etc/ImageMagick-6/policy.xml \
+  && echo "Configuring supervisord" \
+    && mkdir /var/log/supervisord /var/run/supervisord \
+    && mv supervisord.conf /etc/supervisord.conf \
+  && echo "Setting up Docker scripts" \
+    && mv docker-entrypoint.sh /sbin/docker-entrypoint.sh \
+    && chmod 755 /sbin/docker-entrypoint.sh \
+    && mv docker-prepare.sh /sbin/docker-prepare.sh \
+    && chmod 755 /sbin/docker-prepare.sh \
+    && mv wait-for-redis.py /sbin/wait-for-redis.py \
+    && chmod 755 /sbin/wait-for-redis.py \
+    && mv env-from-file.sh /sbin/env-from-file.sh \
+    && chmod 755 /sbin/env-from-file.sh \
+    && mv paperless_cmd.sh /usr/local/bin/paperless_cmd.sh \
+    && chmod 755 /usr/local/bin/paperless_cmd.sh \
+    && mv flower-conditional.sh /usr/local/bin/flower-conditional.sh \
+    && chmod 755 /usr/local/bin/flower-conditional.sh \
+  && echo "Installing management commands" \
+    && chmod +x install_management_commands.sh \
+    && ./install_management_commands.sh
 
 WORKDIR /usr/src/paperless/src/
 
 # Python dependencies
 # Change pretty frequently
-COPY --chown=1000:1000 --from=pipenv-base /usr/src/pipenv/requirements.txt ./
+COPY --from=pipenv-base /usr/src/pipenv/requirements.txt ./
 
 # Packages needed only for building a few quick Python
 # dependencies
@@ -227,22 +224,20 @@ ARG BUILD_PACKAGES="\
   default-libmysqlclient-dev \
   pkg-config"
 
-ARG ZXING_VERSION=2.3.0
-ARG PSYCOPG_VERSION=3.2.4
-
 # hadolint ignore=DL3042
 RUN --mount=type=cache,target=/root/.cache/pip/,id=pip-cache \
   set -eux \
   && echo "Installing build system packages" \
     && apt-get update \
     && apt-get install --yes --quiet --no-install-recommends ${BUILD_PACKAGES} \
-    && python3 -m pip install --upgrade wheel \
+    && python3 -m pip install --no-cache-dir --upgrade wheel \
   && echo "Installing Python requirements" \
-    && curl --fail --silent --no-progress-meter --show-error --location --remote-name-all --parallel --parallel-max 4 \
-      https://github.com/paperless-ngx/builder/releases/download/psycopg-${PSYCOPG_VERSION}/psycopg_c-${PSYCOPG_VERSION}-cp312-cp312-linux_x86_64.whl \
-      https://github.com/paperless-ngx/builder/releases/download/psycopg-${PSYCOPG_VERSION}/psycopg_c-${PSYCOPG_VERSION}-cp312-cp312-linux_aarch64.whl \
-      https://github.com/paperless-ngx/builder/releases/download/zxing-${ZXING_VERSION}/zxing_cpp-${ZXING_VERSION}-cp312-cp312-linux_aarch64.whl \
-      https://github.com/paperless-ngx/builder/releases/download/zxing-${ZXING_VERSION}/zxing_cpp-${ZXING_VERSION}-cp312-cp312-linux_x86_64.whl \
+    && curl --fail --silent --show-error --location \
+    --output psycopg_c-3.2.3-cp312-cp312-linux_x86_64.whl \
+    https://github.com/paperless-ngx/builder/releases/download/psycopg-3.2.3/psycopg_c-3.2.3-cp312-cp312-linux_x86_64.whl \
+    && curl --fail --silent --show-error --location \
+    --output psycopg_c-3.2.3-cp312-cp312-linux_aarch64.whl  \
+    https://github.com/paperless-ngx/builder/releases/download/psycopg-3.2.3/psycopg_c-3.2.3-cp312-cp312-linux_aarch64.whl \
     && python3 -m pip install --default-timeout=1000 --find-links . --requirement requirements.txt \
   && echo "Installing NLTK data" \
     && python3 -W ignore::RuntimeWarning -m nltk.downloader -d "/usr/share/nltk_data" snowball_data \
@@ -281,16 +276,18 @@ RUN set -eux \
   && echo "Adjusting all permissions" \
     && chown --from root:root --changes --recursive paperless:paperless /usr/src/paperless \
   && echo "Collecting static files" \
-    && s6-setuidgid paperless python3 manage.py collectstatic --clear --no-input --link \
-    && s6-setuidgid paperless python3 manage.py compilemessages
+    && gosu paperless python3 manage.py collectstatic --clear --no-input --link \
+    && gosu paperless python3 manage.py compilemessages
 
 VOLUME ["/usr/src/paperless/data", \
         "/usr/src/paperless/media", \
         "/usr/src/paperless/consume", \
         "/usr/src/paperless/export"]
 
-ENTRYPOINT ["/init"]
+ENTRYPOINT ["/sbin/docker-entrypoint.sh"]
 
 EXPOSE 8000
 
+CMD ["/usr/local/bin/paperless_cmd.sh"]
+
 HEALTHCHECK --interval=30s --timeout=10s --retries=5 CMD [ "curl", "-fs", "-S", "--max-time", "2", "http://localhost:8000" ]

Pipfile

@@ -7,21 +7,20 @@ name = "pypi"
 dateparser = "~=1.2"
 # WARNING: django does not use semver.
 #          Only patch versions are guaranteed to not introduce breaking changes.
-django = "~=5.1.5"
+django = "~=5.1.4"
 django-allauth = {extras = ["mfa", "socialaccount"], version = "*"}
 django-auditlog = "*"
 django-celery-results = "*"
 django-compression-middleware = "*"
 django-cors-headers = "*"
 django-extensions = "*"
-django-filter = "~=25.1"
+django-filter = "~=24.3"
 django-guardian = "*"
 django-multiselectfield = "*"
 django-soft-delete = "*"
 djangorestframework = "~=3.15.2"
 djangorestframework-guardian = "*"
-drf-spectacular = "*"
-drf-spectacular-sidecar = "*"
+drafthorse = "*"
 drf-writable-nested = "*"
 bleach = "*"
 celery = {extras = ["redis"], version = "*"}
@@ -39,7 +38,7 @@ jinja2 = "~=3.1"
 langdetect = "*"
 mysqlclient = "*"
 nltk = "*"
-ocrmypdf = "~=16.9"
+ocrmypdf = "~=16.7"
 pathvalidate = "*"
 pdf2image = "*"
 psycopg = {version = "*", extras = ["c"]}
@@ -58,9 +57,9 @@ tqdm = "*"
 # See https://github.com/paperless-ngx/paperless-ngx/issues/5494
 uvicorn = {extras = ["standard"], version = "==0.25.0"}
 watchdog = "~=6.0"
-whitenoise = "~=6.9"
+whitenoise = "~=6.8"
 whoosh = "~=2.7"
-zxing-cpp = "*"
+zxing-cpp = {version = "*", platform_machine = "== 'x86_64'"}
 
 
 [dev-packages]

README.md

@@ -55,7 +55,7 @@ A full list of [features](https://docs.paperless-ngx.com/#features) and [screens
 
 # Getting started
 
-The easiest way to deploy paperless is `docker compose`. The files in the [`/docker/compose` directory](https://github.com/paperless-ngx/paperless-ngx/tree/main/docker/compose) are configured to pull the image from the GitHub container registry.
+The easiest way to deploy paperless is `docker compose`. The files in the [`/docker/compose` directory](https://github.com/paperless-ngx/paperless-ngx/tree/main/docker/compose) are configured to pull the image from GitHub Packages.
 
 If you'd like to jump right in, you can configure a `docker compose` environment with our install script:
 

docker/compose/docker-compose.env

@@ -1,17 +1,26 @@
-###############################################################################
-# Paperless-ngx settings                                                      #
-###############################################################################
-
-# See http://docs.paperless-ngx.com/configuration/ for all available options.
-
 # The UID and GID of the user used to run paperless in the container. Set this
 # to your UID and GID on the host so that you have write access to the
 # consumption directory.
 #USERMAP_UID=1000
 #USERMAP_GID=1000
 
-# See the documentation linked above for all options. A few commonly adjusted settings
-# are provided below.
+# Additional languages to install for text recognition, separated by a
+# whitespace. Note that this is
+# different from PAPERLESS_OCR_LANGUAGE (default=eng), which defines the
+# language used for OCR.
+# The container installs English, German, Italian, Spanish and French by
+# default.
+# See https://packages.debian.org/search?keywords=tesseract-ocr-&searchon=names&suite=buster
+# for available languages.
+#PAPERLESS_OCR_LANGUAGES=tur ces
+
+###############################################################################
+# Paperless-specific settings                                                 #
+###############################################################################
+
+# All settings defined in the paperless.conf.example can be used here. The
+# Docker setup does not use the configuration file.
+# A few commonly adjusted settings are provided below.
 
 # This is required if you will be exposing Paperless-ngx on a public domain
 # (if doing so please consider security measures such as reverse proxy)
@@ -21,17 +30,13 @@
 # be a very long sequence of random characters. You don't need to remember it.
 #PAPERLESS_SECRET_KEY=change-me
 
-# Use this variable to set a timezone for the Paperless Docker containers. Defaults to UTC.
+# Use this variable to set a timezone for the Paperless Docker containers. If not specified, defaults to UTC.
 #PAPERLESS_TIME_ZONE=America/Los_Angeles
 
 # The default language to use for OCR. Set this to the language most of your
 # documents are written in.
 #PAPERLESS_OCR_LANGUAGE=eng
 
-# Additional languages to install for text recognition, separated by a whitespace.
-# Note that this is different from PAPERLESS_OCR_LANGUAGE (default=eng), which defines
-# the language used for OCR.
-# The container installs English, German, Italian, Spanish and French by default.
-# See https://packages.debian.org/search?keywords=tesseract-ocr-&searchon=names&suite=buster
-# for available languages.
-#PAPERLESS_OCR_LANGUAGES=tur ces
+# Set if accessing paperless via a domain subpath e.g. https://domain.com/PATHPREFIX and using a reverse-proxy like traefik or nginx
+#PAPERLESS_FORCE_SCRIPT_NAME=/PATHPREFIX
+#PAPERLESS_STATIC_URL=/PATHPREFIX/static/ # trailing slash required

docker/docker-prepare.sh

@@ -0,0 +1,120 @@
+#!/usr/bin/env bash
+
+set -e
+
+wait_for_postgres() {
+	local attempt_num=1
+	local -r max_attempts=5
+
+	echo "Waiting for PostgreSQL to start..."
+
+	local -r host="${PAPERLESS_DBHOST:-localhost}"
+	local -r port="${PAPERLESS_DBPORT:-5432}"
+
+	# Disable warning, host and port can't have spaces
+	# shellcheck disable=SC2086
+	while [ ! "$(pg_isready --host ${host} --port ${port})" ]; do
+
+		if [ $attempt_num -eq $max_attempts ]; then
+			echo "Unable to connect to database."
+			exit 1
+		else
+			echo "Attempt $attempt_num failed! Trying again in 5 seconds..."
+		fi
+
+		attempt_num=$(("$attempt_num" + 1))
+		sleep 5
+	done
+	echo "Connected to PostgreSQL"
+}
+
+wait_for_mariadb() {
+	echo "Waiting for MariaDB to start..."
+
+	local -r host="${PAPERLESS_DBHOST:=localhost}"
+	local -r port="${PAPERLESS_DBPORT:=3306}"
+
+	local attempt_num=1
+	local -r max_attempts=5
+
+	# Disable warning, host and port can't have spaces
+	# shellcheck disable=SC2086
+	while ! true > /dev/tcp/$host/$port; do
+
+		if [ $attempt_num -eq $max_attempts ]; then
+			echo "Unable to connect to database."
+			exit 1
+		else
+			echo "Attempt $attempt_num failed! Trying again in 5 seconds..."
+
+		fi
+
+		attempt_num=$(("$attempt_num" + 1))
+		sleep 5
+	done
+	echo "Connected to MariaDB"
+}
+
+wait_for_redis() {
+	# We use a Python script to send the Redis ping
+	# instead of installing redis-tools just for 1 thing
+	if ! python3 /sbin/wait-for-redis.py; then
+		exit 1
+	fi
+}
+
+migrations() {
+	(
+		# flock is in place to prevent multiple containers from doing migrations
+		# simultaneously. This also ensures that the db is ready when the command
+		# of the current container starts.
+		flock 200
+		echo "Apply database migrations..."
+		python3 manage.py migrate --skip-checks --no-input
+	) 200>"${DATA_DIR}/migration_lock"
+}
+
+django_checks() {
+	# Explicitly run the Django system checks
+	echo "Running Django checks"
+	python3 manage.py check
+}
+
+search_index() {
+
+	local -r index_version=9
+	local -r index_version_file=${DATA_DIR}/.index_version
+
+	if [[ (! -f "${index_version_file}") || $(<"${index_version_file}") != "$index_version" ]]; then
+		echo "Search index out of date. Updating..."
+		python3 manage.py document_index reindex --no-progress-bar
+		echo ${index_version} | tee "${index_version_file}" >/dev/null
+	fi
+}
+
+superuser() {
+	if [[ -n "${PAPERLESS_ADMIN_USER}" ]]; then
+		python3 manage.py manage_superuser
+	fi
+}
+
+do_work() {
+	if [[ "${PAPERLESS_DBENGINE}" == "mariadb" ]]; then
+		wait_for_mariadb
+	elif [[ -n "${PAPERLESS_DBHOST}" ]]; then
+		wait_for_postgres
+	fi
+
+	wait_for_redis
+
+	migrations
+
+	django_checks
+
+	search_index
+
+	superuser
+
+}
+
+do_work

docker/env-from-file.sh

@@ -0,0 +1,42 @@
+#!/usr/bin/env bash
+
+# Scans the environment variables for those with the suffix _FILE
+# When located, checks the file exists, and exports the contents
+# of the file as the same name, minus the suffix
+# This allows the use of Docker secrets or mounted files
+# to fill in any of the settings configurable via environment
+# variables
+
+set -eu
+
+for line in $(printenv)
+do
+	# Extract the name of the environment variable
+	env_name=${line%%=*}
+	# Check if it starts with "PAPERLESS_" and ends in "_FILE"
+	if [[ ${env_name} == PAPERLESS_*_FILE ]]; then
+		# This should have been named different..
+		if [[ ${env_name} == "PAPERLESS_OCR_SKIP_ARCHIVE_FILE" || ${env_name} == "PAPERLESS_MODEL_FILE" ]]; then
+			continue
+		fi
+		# Extract the value of the environment
+		env_value=${line#*=}
+
+		# Check the file exists
+		if [[ -f ${env_value} ]]; then
+
+			# Trim off the _FILE suffix
+			non_file_env_name=${env_name%"_FILE"}
+			echo "Setting ${non_file_env_name} from file"
+
+			# Reads the value from th file
+			val="$(< "${!env_name}")"
+
+			# Sets the normal name to the read file contents
+			export "${non_file_env_name}"="${val}"
+
+		else
+			echo "File ${env_value} referenced by ${env_name} doesn't exist"
+		fi
+	fi
+done

docker/flower-conditional.sh

@@ -0,0 +1,12 @@
+#!/usr/bin/env bash
+
+echo "Checking if we should start flower..."
+
+if [[ -n  "${PAPERLESS_ENABLE_FLOWER}" ]]; then
+	# Small delay to allow celery to be up first
+	echo "Starting flower in 5s"
+	sleep 5
+	celery --app paperless flower --conf=/usr/src/paperless/src/paperless/flowerconfig.py
+else
+	echo "Not starting flower"
+fi

docker/install_management_commands.sh

@@ -1,7 +1,5 @@
 #!/usr/bin/env bash
 
-# Run this script to generate the management commands again (for example if a new command is create or the template is updated)
-
 set -eu
 
 for command in decrypt_documents \
@@ -21,6 +19,6 @@ for command in decrypt_documents \
 	prune_audit_logs;
 do
 	echo "installing $command..."
-	sed "s/management_command/$command/g" management_script.sh >"$PWD/rootfs/usr/local/bin/$command"
-	chmod +x "$PWD/rootfs/usr/local/bin/$command"
+	sed "s/management_command/$command/g" management_script.sh > /usr/local/bin/$command
+	chmod +x /usr/local/bin/$command
 done

docker/management_script.sh

@@ -1,13 +1,17 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
+#!/usr/bin/env bash
 
 set -e
 
-cd "${PAPERLESS_SRC_DIR}"
+cd /usr/src/paperless/src/
+# This ensures environment is setup
+# shellcheck disable=SC1091
+source /sbin/env-from-file.sh
 
-if [[ $(id -u) == 0 ]]; then
-	s6-setuidgid paperless python3 manage.py management_command "$@"
-elif [[ $(id -un) == "paperless" ]]; then
+if [[ $(id -u) == 0 ]] ;
+then
+	gosu paperless python3 manage.py management_command "$@"
+elif [[ $(id -un) == "paperless" ]] ;
+then
 	python3 manage.py management_command "$@"
 else
 	echo "Unknown user."

docker/paperless_cmd.sh

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+
+SUPERVISORD_WORKING_DIR="${PAPERLESS_SUPERVISORD_WORKING_DIR:-$PWD}"
+rootless_args=()
+if [ "$(id -u)" == "$(id -u paperless)" ]; then
+	rootless_args=(
+		--user
+		paperless
+		--logfile
+		"${SUPERVISORD_WORKING_DIR}/supervisord.log"
+		--pidfile
+		"${SUPERVISORD_WORKING_DIR}/supervisord.pid"
+	)
+fi
+
+exec /usr/local/bin/supervisord -c /etc/supervisord.conf "${rootless_args[@]}"

docker/rootfs/etc/s6-overlay/s6-rc.d/init-complete/run

@@ -1,8 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-declare -r log_prefix="[init-complete]"
-declare -r end_time=$(date +%s)
-declare -r start_time=${PAPERLESS_START_TIME_S}
-
-echo "${log_prefix} paperless-ngx docker container init completed in $(($end_time-$start_time)) seconds"
-echo "${log_prefix} Starting services"

docker/rootfs/etc/s6-overlay/s6-rc.d/init-complete/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-complete/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-complete/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-custom-init/run

@@ -1,44 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[custom-init]"
-
-# Mostly borrowed from the LinuxServer.io base image
-# https://github.com/linuxserver/docker-baseimage-ubuntu/tree/bionic/root/etc/cont-init.d
-declare -r custom_script_dir="/custom-cont-init.d"
-
-# Tamper checking.
-# Don't run files which are owned by anyone except root
-# Don't run files which are writeable by others
-if [ -d "${custom_script_dir}" ]; then
-	if [ -n "$(/usr/bin/find "${custom_script_dir}" -maxdepth 1 ! -user root)" ]; then
-		echo "${log_prefix} **** Potential tampering with custom scripts detected ****"
-		echo "${log_prefix} **** The folder '${custom_script_dir}' must be owned by root ****"
-		exit 0
-	fi
-	if [ -n "$(/usr/bin/find "${custom_script_dir}" -maxdepth 1 -perm -o+w)" ]; then
-		echo "${log_prefix} **** The folder '${custom_script_dir}' or some of contents have write permissions for others, which is a security risk. ****"
-		echo "${log_prefix} **** Please review the permissions and their contents to make sure they are owned by root, and can only be modified by root. ****"
-		exit 0
-	fi
-
-	# Make sure custom init directory has files in it
-	if [ -n "$(/bin/ls --almost-all "${custom_script_dir}" 2>/dev/null)" ]; then
-		echo "${log_prefix} files found in ${custom_script_dir} executing"
-		# Loop over files in the directory
-		for SCRIPT in "${custom_script_dir}"/*; do
-			NAME="$(basename "${SCRIPT}")"
-			if [ -f "${SCRIPT}" ]; then
-				echo "${log_prefix} ${NAME}: executing..."
-				/command/with-contenv /bin/bash "${SCRIPT}"
-				echo "${log_prefix} ${NAME}: exited $?"
-			elif [ ! -f "${SCRIPT}" ]; then
-				echo "${log_prefix} ${NAME}: is not a file"
-			fi
-		done
-	else
-		echo "${log_prefix} no custom files found exiting..."
-	fi
-else
-	echo "${log_prefix} ${custom_script_dir} doesn't exist, nothing to do"
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-custom-init/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-custom-init/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-custom-init/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-env-file/run

@@ -1,30 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[env-init]"
-
-echo "${log_prefix} Checking for environment from files"
-
-if find /run/s6/container_environment/*"_FILE" -maxdepth 1 > /dev/null 2>&1; then
-	for FILENAME in /run/s6/container_environment/*; do
-		if [[ "${FILENAME##*/}" == PAPERLESS_*_FILE ]]; then
-			# This should have been named different..
-			if [[ ${FILENAME} == "PAPERLESS_OCR_SKIP_ARCHIVE_FILE" || ${FILENAME} == "PAPERLESS_MODEL_FILE" ]]; then
-				continue
-			fi
-			SECRETFILE=$(cat "${FILENAME}")
-			# Check the file exists
-			if [[ -f ${SECRETFILE} ]]; then
-				# Trim off trailing _FILE
-				FILESTRIP=${FILENAME//_FILE/}
-				# Set environment variable
-				cat "${SECRETFILE}" > "${FILESTRIP}"
-				echo "${log_prefix} ${FILESTRIP##*/} set from ${FILENAME##*/}"
-			else
-				echo "${log_prefix} cannot find secret in ${FILENAME##*/}"
-			fi
-		fi
-	done
-else
-		echo "${log_prefix} No *_FILE environment found"
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-env-file/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-env-file/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-env-file/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-folders/run

@@ -1,33 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[init-folders]"
-
-declare -r export_dir="/usr/src/paperless/export"
-declare -r data_dir="${PAPERLESS_DATA_DIR:-/usr/src/paperless/data}"
-declare -r media_root_dir="${PAPERLESS_MEDIA_ROOT:-/usr/src/paperless/media}"
-declare -r consume_dir="${PAPERLESS_CONSUMPTION_DIR:-/usr/src/paperless/consume}"
-declare -r tmp_dir="${PAPERLESS_SCRATCH_DIR:=/tmp/paperless}"
-
-echo "${log_prefix} Checking for folder existence"
-
-for dir in \
-	"${export_dir}" \
-	"${data_dir}" "${data_dir}/index" \
-	"${media_root_dir}" "${media_root_dir}/documents" "${media_root_dir}/documents/originals" "${media_root_dir}/documents/thumbnails" \
-	"${consume_dir}" \
-	"${tmp_dir}"; do
-	if [[ ! -d "${dir}" ]]; then
-		mkdir --parents --verbose "${dir}"
-	fi
-done
-
-echo "${log_prefix} Adjusting file and folder permissions"
-for dir in \
-	"${export_dir}" \
-	"${data_dir}" \
-	"${media_root_dir}" \
-	"${consume_dir}" \
-	"${tmp_dir}"; do
-	find "${dir}" -not \( -user paperless -and -group paperless \) -exec chown --changes paperless:paperless {} +
-done

docker/rootfs/etc/s6-overlay/s6-rc.d/init-folders/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-folders/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-folders/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-migrations/run

@@ -1,20 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-declare -r log_prefix="[init-migrations]"
-declare -r data_dir="${PAPERLESS_DATA_DIR:-/usr/src/paperless/data}"
-
-(
-	# flock is in place to prevent multiple containers from doing migrations
-	# simultaneously. This also ensures that the db is ready when the command
-	# of the current container starts.
-	flock 200
-	echo "${log_prefix} Apply database migrations..."
-	cd "${PAPERLESS_SRC_DIR}"
-
-	if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		exec python3 manage.py migrate --skip-checks --no-input
-	else
-		exec s6-setuidgid paperless python3 manage.py migrate --skip-checks --no-input
-	fi
-
-) 200>"${data_dir}/migration_lock"

docker/rootfs/etc/s6-overlay/s6-rc.d/init-migrations/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-migrations/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-migrations/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-modify-user/run

@@ -1,22 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-declare -r log_prefix="[init-user]"
-
-declare -r usermap_original_uid=$(id -u paperless)
-declare -r usermap_original_gid=$(id -g paperless)
-declare -r usermap_new_uid=${USERMAP_UID:-$usermap_original_uid}
-declare -r usermap_new_gid=${USERMAP_GID:-${usermap_original_gid:-$usermap_new_uid}}
-
-if [[ ${usermap_new_uid} != "${usermap_original_uid}" ]]; then
-	echo "${log_prefix} Mapping UID for paperless to $usermap_new_uid"
-	usermod --non-unique --uid "${usermap_new_uid}" paperless
-else
-	echo "${log_prefix} No UID changes for paperless"
-fi
-
-if [[ ${usermap_new_gid} != "${usermap_original_gid}" ]]; then
-	echo "${log_prefix} Mapping GID for paperless to $usermap_new_gid"
-	groupmod --non-unique --gid "${usermap_new_gid}" paperless
-else
-	echo "${log_prefix} No GID changes for paperless"
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-modify-user/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-modify-user/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-modify-user/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-search-index/run

@@ -1,28 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[init-index]"
-
-declare -r index_version=9
-declare -r data_dir="${PAPERLESS_DATA_DIR:-/usr/src/paperless/data}"
-declare -r index_version_file="${data_dir}/.index_version"
-
-update_index () {
-	echo "${log_prefix} Search index out of date. Updating..."
-	cd "${PAPERLESS_SRC_DIR}"
-	if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py document_index reindex --no-progress-bar
-		echo ${index_version} | tee "${index_version_file}" > /dev/null
-	else
-		s6-setuidgid paperless python3 manage.py document_index reindex --no-progress-bar
-		echo ${index_version} | s6-setuidgid paperless tee "${index_version_file}" > /dev/null
-	fi
-}
-
-if [[ (! -f "${index_version_file}") ]]; then
-	echo "${log_prefix} No index version file found"
-	update_index
-elif [[ $(<"${index_version_file}") != "$index_version" ]]; then
-	echo "${log_prefix} index version updated"
-	update_index
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-search-index/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-search-index/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-search-index/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-start/run

@@ -1,19 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[init-start]"
-
-echo "${log_prefix} paperless-ngx docker container starting..."
-
-# Set some directories into environment for other steps to access via environment
-# Sort of like variables for later
-printf "/usr/src/paperless/src" > /var/run/s6/container_environment/PAPERLESS_SRC_DIR
-echo $(date +%s) > /var/run/s6/container_environment/PAPERLESS_START_TIME_S
-
-# Check if we're starting as a non-root user
-if [ $(id -u) == $(id -u paperless) ]; then
-	printf "true" > /var/run/s6/container_environment/USER_IS_NON_ROOT
-	echo "${log_prefix}  paperless-ngx docker container running under a user"
-else
-	echo "${log_prefix}  paperless-ngx docker container starting init as root"
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-start/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-start/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-start/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-superuser/run

@@ -1,20 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[init-superuser]"
-
-if [[ -n "${PAPERLESS_ADMIN_USER}" ]]; then
-	echo "${log_prefix} Creating superuser..."
-	cd "${PAPERLESS_SRC_DIR}"
-
-	if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		python3 manage.py manage_superuser
-	else
-		s6-setuidgid paperless python3 manage.py manage_superuser
-	fi
-
-	echo "${log_prefix} Superuser creation done"
-
-else
-	echo "${log_prefix} Not creating superuser"
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-superuser/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-superuser/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-superuser/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-system-checks/run

@@ -1,15 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[init-checks]"
-
-# Explicitly run the Django system checks
-echo "${log_prefix} Running Django checks"
-
-cd "${PAPERLESS_SRC_DIR}"
-
-if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-	python3 manage.py check
-else
-	s6-setuidgid paperless python3 manage.py check
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-system-checks/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-system-checks/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-system-checks/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-tesseract-langs/run

@@ -1,65 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[init-tesseract-langs]"
-
-install_languages() {
-	echo "Installing languages..."
-
-	read -ra langs <<<"$1"
-
-	# Check that it is not empty
-	if [ ${#langs[@]} -eq 0 ]; then
-		return
-	fi
-
-	# Build list of packages to install
-	to_install=()
-	for lang in "${langs[@]}"; do
-		pkg="tesseract-ocr-$lang"
-
-		if dpkg --status "$pkg" &>/dev/null; then
-			echo "${log_prefix} Package $pkg already installed!"
-			continue
-		else
-			to_install+=("$pkg")
-		fi
-	done
-
-	# Use apt only when we install packages
-	if [ ${#to_install[@]} -gt 0 ]; then
-
-		# Warn the user if they're not root, but try anyway
-		if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-			echo "${log_prefix} ERROR: Unable to install language ${pkg} as non-root, startup may fail"
-		fi
-
-		apt-get --quiet update &>/dev/null
-
-		for pkg in "${to_install[@]}"; do
-			if ! apt-cache --quiet show "$pkg" &>/dev/null; then
-				echo "${log_prefix} Skipped $pkg: Package not found! :("
-				continue
-			fi
-			echo "${log_prefix} Installing package $pkg..."
-			if ! apt-get --quiet --assume-yes install "$pkg" &>/dev/null; then
-				echo "${log_prefix} Could not install $pkg"
-				exit 1
-			else
-				echo "${log_prefix} Installed $pkg"
-			fi
-		done
-
-	fi
-}
-
-echo "${log_prefix} Checking if additional teseract languages needed"
-
-# Install additional languages if specified
-if [[ -n "$PAPERLESS_OCR_LANGUAGES" ]]; then
-
-	install_languages "$PAPERLESS_OCR_LANGUAGES"
-	echo "${log_prefix} Additional packages installed"
-else
-	echo "${log_prefix} No additional installs requested"
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-tesseract-langs/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-tesseract-langs/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-tesseract-langs/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-wait-for-db/run

@@ -1,70 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[init-db-wait]"
-
-wait_for_postgres() {
-	local attempt_num=1
-	local -r max_attempts=5
-
-	echo "${log_prefix} Waiting for PostgreSQL to start..."
-
-	local -r host="${PAPERLESS_DBHOST:-localhost}"
-	local -r port="${PAPERLESS_DBPORT:-5432}"
-	local -r user="${PAPERLESS_DBUSER:-paperless}"
-
-	# Disable warning, host and port can't have spaces
-	# shellcheck disable=SC2086
-	while [ ! "$(pg_isready -h ${host} -p ${port} --username ${user})" ]; do
-
-		if [ $attempt_num -eq $max_attempts ]; then
-			echo "${log_prefix} Unable to connect to database."
-			exit 1
-		else
-			echo "${log_prefix} Attempt $attempt_num failed! Trying again in 5 seconds..."
-		fi
-
-		attempt_num=$(("$attempt_num" + 1))
-		sleep 5
-	done
-	# Extra in case this is a first start
-	sleep 5
-	echo "Connected to PostgreSQL"
-}
-
-wait_for_mariadb() {
-	echo "${log_prefix} Waiting for MariaDB to start..."
-
-	local -r host="${PAPERLESS_DBHOST:=localhost}"
-	local -r port="${PAPERLESS_DBPORT:=3306}"
-
-	local attempt_num=1
-	local -r max_attempts=5
-
-	# Disable warning, host and port can't have spaces
-	# shellcheck disable=SC2086
-	while ! true > /dev/tcp/$host/$port; do
-
-		if [ $attempt_num -eq $max_attempts ]; then
-			echo "${log_prefix} Unable to connect to database."
-			exit 1
-		else
-			echo "${log_prefix} Attempt $attempt_num failed! Trying again in 5 seconds..."
-
-		fi
-
-		attempt_num=$(("$attempt_num" + 1))
-		sleep 5
-	done
-	echo "Connected to MariaDB"
-}
-
-if [[ "${PAPERLESS_DBENGINE}" == "mariadb" ]]; then
-	echo "${log_prefix} Waiting for MariaDB to report ready"
-	wait_for_mariadb
-elif [[ -n "${PAPERLESS_DBHOST}" ]]; then
-	echo "${log_prefix} Waiting for postgresql to report ready"
-	wait_for_postgres
-fi
-
-	echo "${log_prefix} Database is ready"

docker/rootfs/etc/s6-overlay/s6-rc.d/init-wait-for-db/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-wait-for-db/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-wait-for-db/run

docker/rootfs/etc/s6-overlay/s6-rc.d/init-wait-for-redis/run

@@ -1,14 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[init-redis-wait]"
-
-echo "${log_prefix} Waiting for Redis to report ready"
-
-# We use a Python script to send the Redis ping
-# instead of installing redis-tools just for 1 thing
-if ! python3 /usr/local/bin/wait-for-redis.py; then
-	exit 1
-else
-	echo "${log_prefix} Redis ready"
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/init-wait-for-redis/type

@@ -1 +0,0 @@
-oneshot

docker/rootfs/etc/s6-overlay/s6-rc.d/init-wait-for-redis/up

@@ -1 +0,0 @@
-/etc/s6-overlay/s6-rc.d/init-wait-for-redis/run

docker/rootfs/etc/s6-overlay/s6-rc.d/svc-consumer/run

@@ -1,10 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-cd ${PAPERLESS_SRC_DIR}
-
-if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-	exec python3 manage.py document_consumer
-else
-	exec s6-setuidgid paperless python3 manage.py document_consumer
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/svc-consumer/type

@@ -1 +0,0 @@
-longrun

docker/rootfs/etc/s6-overlay/s6-rc.d/svc-flower/run

@@ -1,24 +0,0 @@
-#!/command/with-contenv /usr/bin/bash
-# shellcheck shell=bash
-
-declare -r log_prefix="[svc-flower]"
-
-echo "${log_prefix} Checking if we should start flower..."
-
-if [[ -n "${PAPERLESS_ENABLE_FLOWER}" ]]; then
-	# Small delay to allow celery to be up first
-	echo "${log_prefix} Starting flower in 5s"
-	sleep 5
-	cd ${PAPERLESS_SRC_DIR}
-
-	if [[ -n "${USER_IS_NON_ROOT}" ]]; then
-		exec /usr/local/bin/celery --app paperless flower --conf=${PAPERLESS_SRC_DIR}/paperless/flowerconfig.py
-	else
-		exec s6-setuidgid paperless /usr/local/bin/celery --app paperless flower --conf=${PAPERLESS_SRC_DIR}/paperless/flowerconfig.py
-	fi
-
-else
-	echo "${log_prefix} Not starting flower"
-	# https://skarnet.org/software/s6/s6-svc.html
-	s6-svc -Od .
-fi

docker/rootfs/etc/s6-overlay/s6-rc.d/svc-flower/type

@@ -1 +0,0 @@
-longrun